Before the Weir

The water above the mill used to carry the first wash straight into the wheel. Players could see a long change in color and did not have a place to observe where it began. The steps lower down stayed pale, and it was difficult to tell whether another stroke would join them or merely send more pigment into the same fast current. We put a ledge beside the weir where one small front can pause.
Find a quiet place in the paper channel
Before the wash starts, the upper stream bends around a narrow reference stone. The dry part reaches a low ledge with a joining face along the bank. If somebody draws a line beside that face, the color follows the quieter water near the edge. It reaches the lower stone before it spreads across the mill race. The painter gets a brief view of where the wash is going before deciding whether to send another one.
The quick route is still available. A brush placed above the narrow part of the channel can take color farther under the wheel. A wash there does something different from the smaller bank stroke. The current exercise carries that distinction into the practice rather than scoring one action simply as wrong. Color that reaches the wheel can identify the path another character uses later.
Make the ledge visible before it carries a wash
The first render gave the stone a strong pale highlight. Against a mostly white channel it looked like an untouched part of the painting that needed to be filled. We gave the bank a soft shadow and left just enough paper on top to show where the ledge ends. From the low position at the wheel, that edge lines up beside the small steps. It remains visible while the first slow wash reaches it.
The dry part of the paper separates two front edges. This makes a narrow band of brushwork useful even when the color itself is quiet. At a later setting the current carries some pigment across. The moving front leaves a short mark that a player can compare with the stone’s starting position. If it fills too quickly, the review notes specify how much of the paper was still dry at the moment of the second stroke.
Check one landing before adjusting the current again
At the lower edge a character can stand once the crossing is recognisable. We keep the stone under their feet distinct from the rest of the wash. If you continue painting the faster current, the quiet ledge remains a useful starting point for comparing older and newer strokes. A later route may need color that appears somewhere the painter could not see from the first steps.
Our prototype review first tries two narrow washes and observes the gap from the upper bank. A second run uses one broader mark near the same place. A third compares the upstream view after walking toward the wheel. Each leaves the reader with a place they can name even if they haven’t restored the entire channel. The test excludes extra windows or bright signs that would distract from the limited part being studied.
See where the two fronts can meet
The Mill Race uses the ledge as a place to inspect the first crossing. Where Washes Meet examines the result of sending another pigment into the quick part of the channel. The ledge is working when somebody can put one stroke on it, describe what that changed below and still tell which neighboring surface hasn’t had paint through it. The next stroke can then be a choice about which part of the mill they want to make visible.